This guide is on how to remove privacy protection passwords without a PC on android devices. If by any chance you don’t recall or don’t know the password which was used on your device be HTC, Infinix, iTel and etc, this tutorial will guide you through the entire step by step towards getting past the anti-theft protection password on your android device.
It so happens that someone else might input a different password and never tell you, or you may simply forget the one you used. Regardless of whatever the cause is, taking time and going through this will help you learn how to bypass or remove the “please enter privacy protection password or pin” in 4 different alternative options. Please note that you might require performing one or more a step depending on your device.
Remove privacy protection password option #1 using Hard Reset [without PC]
– Power off your mobile phone.
– Press Vol up and power key at the same time.
– Release the power key once you hear the vibration and continue holding the volume up key.
– Scroll down to “Clear EMMC”, press the power key, and wait for the operation to complete.
– Reboot your phone and see if you can go past the “privacy protection”.
Remove privacy protection password option #2 using Miracle Box
– Launch the Miracle flashing box software and click on MTK.
– Next to the Service menu, click Unlock/ Fix button.
– Click in the “Clear Anti-theft box and click Connect.
– Power off your phone and click Start Button.
– Insert a USB cable from a computer into a phone and wait for an operation.
– You should see Anti-theft Code cleared at the end of it all.
– Reboot your phone and see if you can go past the “privacy protection”.
Remove privacy protection password option #3 using Aladdin
– Launch [[[GSM Aladdin key]]] software and click Connect.
– Click on MediaTek from the Menu list and Services.
– Click the “Clear private code” box and power off your phone.
– Click Start Button and insert the USB cable from the computer into the phone and wait for the operation.
– Reboot your phone and see if you can go past the “privacy protection”.
Remove privacy protection password option #4 using NCK Dongle
– Launch [[[NCK Dongle]]] software and click Connect.
– Click on the service menu from the list.
– Power off your phone and click “Reset Privacy”.
– Click “YES” and insert a USB cable on your phone.
– Reboot your phone and see if you can go past the “privacy protection”.
Just in case you do all the above and you still fail, repeat option #1 above and it should work well since sometimes, you would need to clear all data in order for new settings to work.
